Taurus Enters 9mm PDW Segment

Taurus USA announced on April 14 the launch of the Taurus RPC, a new 9mm platform described by the company as its first dedicated entry in the personal defense weapon, or PDW, category. Taurus said the RPC is built to NATO standards and is intended to offer a compact format with a focus on reliability and adaptability.

The release places the RPC as an expansion beyond the company’s established handgun and long-gun lines into a more specialized pistol-caliber platform market.

Layout, Materials, and Controls

According to Taurus, the RPC uses an aluminum construction intended to reduce weight while maintaining what the company describes as duty-grade durability. The platform includes fully ambidextrous controls, with bolt release/lock and magazine release access from either side.

The charging handle is non-reciprocating and reversible, allowing users to configure it for right- or left-side operation. Taurus also lists an AR-15 compatible soft rubber over-molded grip and a single-stage, flat-faced trigger.

Three integrated quick-detach sling attachment points are built into the platform for carry options.

Rail System and Barrel Setup

The RPC uses a full-length Picatinny top rail for optics and other accessories, paired with an M-LOK handguard for additional mounting space. At the rear, the receiver includes a vertical Picatinny rail for attachments.

A 4.5-inch threaded barrel is standard across the line. Taurus said the RPC also incorporates a quick-change barrel system intended to support additional configurations in the future.

Configurations and Magazine Options

Taurus is offering two primary versions of the RPC. The standard model uses a rear Picatinny rail end plate, while the second version includes a Strike Industries FSA folding brace. Taurus said the brace-equipped model is intended to provide added stability while retaining a compact profile.

The platform feeds from 32-round 9mm magazines as standard. Taurus also said both versions will be offered with 10-round magazines for jurisdictions where higher-capacity magazines are restricted.

Company Statement and Pricing

In the announcement, Taurus President and CEO Bret Vorhees said the RPC represents “an important step” for the company as it enters a new product category. He described the platform as designed to be reliable, easy to use, and adaptable while meeting the value expectations of Taurus customers.

Taurus lists the MSRP at $938.99 for the standard non-brace model and $1,098.99 for the version fitted with the Strike Industries brace.

Published Specifications

Taurus identifies the RPC’s listed features as a 9mm chambering, 32-round capacity, full-length Picatinny top rail, rear vertical Picatinny rail, M-LOK handguard, fully ambidextrous controls, flat-faced single-stage trigger, AR-15 compatible over-molded grip, 4.5-inch threaded barrel, three QD sling attachment points, and a quick-change barrel system.

Springfield Armory adds target-sighted 1911 Garrison models in .45 ACP and 9mm

Springfield Armory announced on April 17, 2026 the release of two new 1911 Garrison Target pistols, chambered in .45 ACP and 9mm. The additions expand the company’s Garrison line with versions equipped with a fully adjustable rear sight intended for accuracy-focused and competition-oriented use.

Both pistols retain the traditional Government-size 1911 format and are built with hot salt blued carbon steel paired with wood grip panels. Springfield described the models as classically styled 1911s updated with modern features.

Shared construction and sighting features

The two Garrison Target variants use forged carbon steel slides and frames. Each pistol is fitted with a 5-inch forged stainless steel match-grade barrel.

A key change from standard configurations is the steel adjustable rear sight, which provides windage and elevation adjustment. Springfield said the rear face of the sight is black and serrated to reduce glare and improve the sight picture. The front sight uses a high-visibility white dot.

The pistols also ship with checkered thinline wood grips. Springfield said the forged steel construction is consistent with its broader 1911 line.

Chamberings, magazines, and capacities

The .45 ACP version ships with a blued steel magazine and has a stated capacity of 7+1. The 9mm version includes a stainless steel magazine with a stated capacity of 9+1.

Aside from chambering, magazine type, and capacity, the release indicates the two handguns share the same general construction, barrel length, finish, and sighting setup.

Company statement on intended role

In the announcement, Steve Kramer, vice president of marketing for Springfield Armory, said the .45 ACP and 9mm Garrison Target pistols are intended to offer “a classically styled 1911 with modern features designed to wring out maximum accuracy potential.” He also cited the forged steel construction and adjustable rear sight as central elements of the design.

Model numbers and listed pricing

Springfield identified the two pistols as follows: 1911 Garrison Target .45 ACP, model PX9420-ADJ, UPC 706397995911; and 1911 Garrison Target 9mm, model PX9419-ADJ, UPC 706397995904.

The release contains two different MSRP figures. In the main body text, Springfield states that both models have an MSRP of $899. However, the individual product listings at the end of the release give an MSRP of $999 for the .45 ACP model and $999 for the 9mm model.

Position in the current 1911 market

The launch places the Garrison Target models in the segment of full-size 1911 pistols configured for users who want adjustable sights while retaining a conventional steel-frame layout, single-action operation, and traditional materials. The additions also continue the practice of offering the same platform in both .45 ACP, the original 1911 chambering, and 9mm, which has become increasingly common for training, competition, and lower-recoil use.

Release and configuration

Springfield Armory announced on April 17, 2026, the release of the Model 2020 Heatseeker .308 Pistol, a bolt-action firearm built on the company’s Model 2020 action and configured in a compact chassis format. The pistol is chambered in .308 Win., has an overall length of 22.5 inches, and uses a 12-inch barrel. Springfield lists the finish as Graphite Black Cerakote.

The launch adds a pistol-format variant to the Model 2020 line, which previously centered on bolt-action rifles. In company comments accompanying the announcement, Steve Kramer, vice president of marketing for Springfield Armory, said the Model 2020 line had developed a reputation for “custom-grade performance at a production rifle price” and said the new pistol adds another option within that family.

Action and chassis details

The firearm uses the Model 2020 action, which Springfield describes as a custom-grade design with dual locking lugs and EDM-cut raceways intended to promote smooth cycling and consistent operation.

That action is fitted into the Sharps Bros 1913 Heatseeker chassis. According to the release, the chassis is machined from a single block of aircraft-grade aluminum and includes an integral recoil lug. External features include extensive M-Lok mounting surfaces, a compact handguard, a rear-mounted section of Picatinny rail, and an AR-pattern B5 Systems P5 grip.

Barrel, muzzle, and feeding system

Springfield states that the pistol’s 12-inch barrel is made from stainless steel and uses a 1:10 twist rate. The muzzle is threaded 5/8x24 and ships with the company’s SA Radial Brake installed.

Feeding is from a detachable five-round magazine using the AICS pattern. The pistol is also supplied with a Picatinny rail scope mount for optics installation.

Weight and trigger specifications

The listed unloaded weight is 6 pounds. Springfield says the pistol uses an adjustable TriggerTech trigger with a pull-weight range of 2.5 to 5 pounds.

Taken together, the specifications place the model in the compact precision category, combining a short overall footprint with common accessory interfaces and a detachable box magazine system.

Compatibility, legal note, and pricing

In its announcement, Springfield said the Heatseeker .308 Pistol is designed to accept user-selected suppressors, optics, braces, and stocks. The company noted that National Firearms Act restrictions may apply to some configurations and advised buyers to consult qualified legal guidance as needed.

Springfield lists the Model 2020 Heatseeker .308 Pistol under item number BAH912308B with UPC 706397000745. The announced MSRP is $1,999.

Launch announcement

Springfield Armory announced the SAINT Victor 5.5-inch 9mm PDW on April 16, 2026, in a release issued from Geneseo, Illinois. The firearm is a compact 9mm, AR-pattern personal-defense-weapon-style platform built around a 5.5-inch barrel and an SB Tactical HBPDW collapsible brace. Springfield said the model is intended for maneuverability in confined spaces while retaining space for optics and other accessories.

Receiver and operating system

The SAINT Victor 9mm PDW uses forged upper and lower receivers and operates by direct blowback. Springfield identified the operating system as a reliability-focused design choice for the platform. The firearm also includes a full-length top Picatinny rail, giving users a continuous mounting surface for optics and accessory placement on the upper portion of the gun.

The company said the overall layout is meant to keep the firearm short and maneuverable without removing common AR-style mounting and control features.

Brace and handling features

The SB Tactical HBPDW brace is mounted on the PDW's lower receiver extension. Springfield said the brace is designed to keep the firearm's footprint compact while adding stability and control. The assembly is described as lightweight and low profile, with three-position adjustability.

Adjustments are made through a lock/release button located on the left side of the brace. Springfield said the setup allows users to tailor the brace position for handling and movement in tighter environments. The firearm also includes a low-profile hand stop on the handguard, which the company said is intended to provide a consistent forward index point for the support hand.

Barrel, muzzle, and handguard

The PDW is fitted with a 5.5-inch chrome-moly vanadium barrel with a 1:10 twist rate. The barrel is Melonite-coated and threaded 1/2x28 at the muzzle. Springfield ships the firearm with an SA Muzzle Drum installed.

Surrounding the barrel is a free-floated aluminum handguard with M-Lok compatibility. Springfield's release emphasized the combination of the short barrel, compact brace, and free-float handguard as part of the firearm's close-quarters configuration.

Finish, controls, and magazine

The firearm is finished in Tungsten Gray Cerakote. Springfield said the finish is intended to provide a low-glare surface and resistance to abrasion and corrosion, while also reducing maintenance demands and tolerating high temperatures.

Other listed features include a B5 Systems Type 23 P-Grip, a 45-degree short-throw ambidextrous safety, and a flat trigger with a nickel boron coating. The SAINT Victor 9mm PDW feeds from a Colt-pattern steel 32-round magazine.

Model information and company statement

Springfield identified the firearm as model STV95509T-PDW with UPC 706397002008. MSRP is $1,399.

In the announcement, Steve Kramer, vice president of marketing for Springfield Armory, said, "The SAINT Victor 5.5-inch 9mm PDW offers uncompromising compact firepower. With its short 5.5-inch barrel and collapsible HPDW brace, this is a compact firearm designed to deliver when it counts."

Henry Introduces Bear’s Leg Lever-Action Pistol

Henry Repeating Arms has announced the Bear’s Leg Pistol, a modernized lever-action handgun based on the classic Mare’s Leg format. The new model is offered in four chamberings: .357 Magnum/.38 Special, .44 Magnum/.44 Special, .30-30 Winchester, and .45-70 Government. MSRP is listed at $1,129 for all variants.

The Bear’s Leg uses a blued steel receiver and a round blued steel barrel with black synthetic furniture. All versions share a 13.8-inch barrel, 25.1-inch overall length, transfer bar safety, large loop lever, side loading gate, and a factory-threaded muzzle in 5/8x24.

Modernized Configuration

A key element of the launch is Henry’s move toward accessory-ready features. The Bear’s Leg ships with a polymer handguard that incorporates M-LOK slots and a Picatinny rail section for attaching lights and other accessories. Henry also positions the platform for suppressor and muzzle device use through the threaded barrel.

The company describes the pistol as suited to modern lever-gun setups, including optics and specialized field configurations. All models are drilled and tapped for optics mounting. Henry’s published model data lists Weaver 63B scope mount compatibility for the .30-30 and .45-70 versions, and BB-RSM compatibility for the .357 and .44 variants.

Chamberings, Capacity, and Weight

The H012GBLX-357 and H012GBLX-44 pistol-caliber models each have a 4-round capacity and weigh 5.75 pounds. The .357 version uses a 1:16 twist rate, while the .44 version uses 1:20.

The rifle-caliber H009GBLX-3030 and H010GBLX-4570 models each have a 3-round capacity and weigh 6.59 pounds. The .30-30 carries a 1:12 twist rate, and the .45-70 uses 1:20.

Henry markets the pistol-caliber models as lower-recoil options with broader ammunition flexibility, while the .30-30 and .45-70 versions extend the format into traditional rifle cartridges.

Sights and Published Specifications

Henry’s launch materials describe the Bear’s Leg as fitted with fiber optic sights. The detailed specification tables published for each model list a fully adjustable semi-buckhorn rear sight with a diamond insert and a brass bead front sight.

Other listed specifications include pistol-grip styling, no buttpad or length-of-pull measurement, and “target” as the stated best use category for all four models.

NFA Path and Intended Roles

Henry also identifies the Bear’s Leg as a potential Short-Barreled Rifle conversion platform, where legally permitted and with approved ATF paperwork. Because the pistol already includes rail-equipped furniture and a threaded barrel, the company presents it as a factory starting point for users planning a more compact suppressed build.

In practical terms, the Bear’s Leg is positioned as a compact lever-action option for range use, property carry, camp use, and vehicle storage where a full-length rifle may be less convenient. With both pistol and rifle calibers available, Henry’s new platform enters the market as a feature-rich variant of the lever-action pistol format rather than a purely cosmetic throwback.

HK Introduces VP9CC Micro-Compact 9mm

Heckler & Koch has announced the VP9CC, a new micro-compact pistol chambered in 9mm and built at the company’s factory in Oberndorf, Germany. The model is positioned as a reduced-size variant of the existing VP9 series rather than a separate design, carrying over the platform’s general ergonomics, controls, and trigger system into a smaller concealed-carry format.

The VP9CC measures 6.02 inches overall with a 3.12-inch barrel and an unloaded weight of 17.64 ounces.

Controls, Ergonomics, and Magazine Setup

HK says the VP9CC retains several familiar VP9 features, including fully ambidextrous controls, the company’s paddle-style magazine release, and rear charging supports on the slide. It also uses the same trigger design found on larger VP9 pistols, described by HK as having a short take-up, crisp break, and positive reset.

To tailor fit, the pistol includes six interchangeable backstraps that allow changes to grip size and trigger reach. The standard magazine package consists of one 10-round flush-fit magazine and one 12-round extended magazine.

A Picatinny accessory rail is integrated into the frame for lights or other rail-mounted accessories.

Sights and Optics Configurations

The VP9CC is being offered in both optics-ready and optics-equipped variants. Optics-equipped models ship with a Vortex Defender CCW closed-emitter micro optic installed from the factory.

Standard iron sights consist of a tritium front sight paired with a serrated black rear. HK’s optics mounting arrangement uses a deeper slide cut and a U-channel adapter plate that wraps around the striker assembly. According to the company, this places the optic more than 40 percent lower than conventional adapter plate systems, allowing co-witness with the factory sights.

Construction and Safety Features

The VP9CC uses a hammer-forged barrel made from HK’s proprietary cannon-grade steel. HK states the pistol meets or exceeds NATO AC/225 specifications.

Safety features include the VP family’s Multi-Axis Safety System, which combines a trigger safety with a firing pin blocking safety operating at 90 degrees to one another. The pistol also includes a disassembly safety that prevents slide removal until both the chamber and magazine are cleared, along with a loaded chamber indicator.

Specifications, Pricing, and Availability

Key specifications released by HK include 9mm chambering, six interchangeable backstraps, tritium and serrated iron sights, and support for either optics-ready or optics-equipped configurations. The proprietary optic mount is a central part of the package, with HK emphasizing its lower mounting height compared with standard plate systems.

MSRP ranges from $1,049 to $1,399, depending on configuration. HK said shipping has already begun, with full dealer availability expected by the end of April.

New SA-35 Variant Announced

Springfield Armory has expanded its SA-35 pistol line with the introduction of the SA-35 4", a new compact-format 9mm variant announced April 7, 2026. The pistol adds a shorter configuration to the company’s existing SA-35 family while retaining the core design elements that define the series.

The SA-35 is Springfield Armory’s modernized interpretation of the Browning Hi-Power, the historic P-35 pattern originally associated with John Moses Browning. In keeping with that design heritage, the new model continues the line’s traditional steel-frame construction and classic “wood and steel” presentation, but incorporates a number of updates intended to improve handling and compatibility with current ammunition.

Compact Format, Same Core Design

The new model uses a 4-inch barrel, reducing overall length compared with the full-size SA-35 while aiming to preserve the handling characteristics of the larger pistol. Springfield Armory positions the shorter version as a more compact and faster-handling option for shooters interested in the platform.

Like the rest of the SA-35 line, the 4" variant is built with a forged carbon steel frame and slide. The barrel is also forged steel. The company states that the barrel and feed system retain the improved feed ramp geometry used on other SA-35 pistols, a change intended to support more reliable function with modern defensive ammunition.

Mechanical and Ergonomic Updates

Springfield Armory’s revisions to the Hi-Power pattern continue on the 4-inch model. The pistol features a recontoured hammer designed to reduce the likelihood of hammer bite, one of the common complaints associated with older Hi-Power-style pistols. It also includes an extended thumb safety to improve manipulation.

Sighting equipment consists of a white dot front sight paired with a black serrated Tactical Rack rear sight. In addition to standard sighting use, the rear sight profile is intended to support one-handed slide manipulation techniques.

These updates reflect Springfield Armory’s broader approach with the SA-35 line: preserving the familiar form and feel of the original platform while making practical changes for contemporary use.

Capacity and Configuration

The SA-35 4" feeds from a flush-fitting 15-round magazine, giving it a higher capacity than the original Hi-Power’s traditional 13-round magazine. The magazine interfaces with a beveled magazine well, which is intended to aid reloads without significantly altering the pistol’s classic external profile.

Springfield Armory has not positioned the new model as a departure from the established SA-35 concept, but rather as a size variation within the same family. The shortened barrel and compact dimensions are the primary changes, while the pistol’s operating concept, steel construction, and overall layout remain consistent with the standard version.

Finish, Production, and Price

The pistol is finished in matte blue on its carbon steel components and ships with checkered walnut grips shaped to support control while maintaining the series’ traditional appearance. Springfield Armory says the SA-35 4" is manufactured in the United States.

MSRP is set at $799. In a company statement, Vice President of Marketing Steve Kramer said the original SA-35 found immediate success by combining traditional styling with modern enhancements, and described the 4-inch version as offering the same appeal in a smaller package.

With the addition of the SA-35 4", Springfield Armory further broadens its updated Hi-Power-style lineup, giving buyers a more compact option that remains closely tied to the platform’s historical design.

Springfield Armory Introduces Echelon Pistols with Factory-Mounted Aimpoint COA

Springfield Armory has launched a new series of Echelon 9mm pistols factory-equipped with the Aimpoint COA closed-emitter red dot sight. The initial rollout includes select Echelon variants machined for Aimpoint’s proprietary A-CUT interface, integrating the optic directly into the slide without adapter plates.

The collaboration marks an expansion of Springfield’s optics-ready handgun offerings, delivering a factory-installed solution designed to streamline mounting and enhance durability.

A-CUT Interface and Mounting System

The A-CUT system utilizes a full-length dovetail interface secured by a front hook and rear wedge. This wedge-locking mechanism is engineered to redirect lateral forces into the dovetail rather than the mounting screws, reducing stress on fasteners and supporting long-term zero retention under sustained firing.

The optic’s ultra-low mounting position allows co-witnessing with standard-height iron sights, maintaining backup sight capability without suppressor-height replacements. By integrating the optic directly into the slide, the system eliminates the need for intermediary plates and aims to provide a more rigid attachment method.

Aimpoint COA Optic Specifications

The Aimpoint COA features a 7075-T6 aluminum housing and a 3.5 MOA aiming dot. Powered by a single CR2032 battery, the optic offers a claimed runtime exceeding five years. Brightness settings accommodate both daylight visibility and night vision compatibility.

Designed for duty and carry use, the COA employs a fully enclosed emitter to protect against debris and environmental exposure. Aimpoint rates the optic for submersion up to 25 meters. A side-access battery compartment allows battery replacement without removing the optic from the slide.

Available Echelon Variants and Capacity

At launch, three Echelon models are offered with the factory-mounted COA:

• Echelon 4.5F: Full-size configuration with a 4.5-inch barrel.
• Echelon 4.0FC: Hybrid model pairing a full-size frame with a compact slide.
• Echelon 4.0C: Compact model featuring a 4-inch barrel.

Magazine capacities range from 15 to 20 rounds, depending on the variant and configuration.

Pricing and Market Position

All three COA-equipped Echelon pistols carry an MSRP of $1,119. Springfield Armory positions the package as a factory-integrated optics solution within the Echelon lineup. With the Aimpoint COA optic priced separately at $617 and standard Echelon models starting at $710, the combined offering represents a bundled configuration at a lower total cost than purchasing components individually.

According to Springfield Armory Vice President of Marketing Steve Kramer, the partnership aims to provide a combination suited for demanding environments, including military, law enforcement, concealed carry, and competitive applications.

Springfield Armory also confirmed that 1911 and 1911 DS models configured with the A-CUT interface and Aimpoint COA are planned for future release.

U.S.-Focused Expansion Debuts at IWA 2026

At IWA OutdoorClassics 2026 in Nuremberg, Pistollo unveiled a U.S.-specific variant of its pistol platform alongside a limited production model developed in partnership with American distributor Deluxe Arms. The announcement marks a targeted effort to increase the brand’s presence in the United States through enhanced compatibility and exclusive offerings.

The standard U.S. configuration incorporates several technical modifications designed to meet American consumer preferences, particularly in the areas of accessory mounting and suppressor readiness.

Expanded Accessory Compatibility

A key change to the U.S. variant is the addition of a rear-mounted Weaver/Picatinny rail. This interface enables users to attach accessories such as stabilizing braces, stocks (where legally permitted), or other rear-mounted components. The addition reflects growing demand in the U.S. market for modular firearm platforms capable of accommodating various configurations.

At the top of the slide, Pistollo has replaced the standard collimator cover with a Picatinny rail section. This modification allows direct mounting of a broad range of red dot optics currently available on the market, eliminating the need for proprietary mounting solutions and expanding compatibility with widely used sighting systems.

Threaded Compensator for Suppressor Use

The compensator on the American model has also been revised. It now features a ½×28 thread pitch, a common U.S. standard for muzzle devices and suppressor attachment. This threading enables users to install compatible suppressors or quick-detach adapters without requiring additional modification. The update aligns the platform with prevailing U.S. accessory standards and provides greater flexibility for owners seeking suppressor-ready configurations.

Pistollo 77 Launch Edition Limited to 150 Units

In addition to the standard U.S. version, Pistollo introduced the Pistollo 77 Launch Edition, a limited production model capped at 150 units. Priced at $4,377.77, the edition emphasizes exclusivity and distinctive aesthetics.

The Launch Edition features a Greenback Cerakote finish complemented by gold-colored controls and a matching muzzle device. Engraving on the frame incorporates Bald Eagle and Liberty-themed artwork, underscoring its American-market focus.

Included Optic and Stabilizing Brace

Each Pistollo 77 Launch Edition pistol is delivered with a Holosun AEMS Core X2 optic featuring a gold reticle. The package also includes a custom Pistollo stabilizing brace designed to integrate with the platform’s rear rail system.

With the introduction of the U.S.-specific configuration and the limited Launch Edition, Pistollo is positioning its platform to compete more directly in the American market through standardized compatibility, suppressor-ready features, and a premium collector-oriented offering.

Product Launch and Availability

Henry Repeating Arms began shipping its new Explorer Carbine series on February 19, 2026, following the line’s introduction at the 2026 SHOT Show. The carbines are offered across several of the company’s established centerfire lever-action platforms and incorporate updated finishes and configuration changes intended to enhance durability and field utility.

Design and Finish

Each Explorer Carbine features a Burnt Bronze Cerakote finish applied to the lever, receiver, barrel, and outer magazine tube. According to Henry, the finish draws inspiration from the landscapes of the American Southwest and is the first in a planned series of regionally themed color treatments.

Beyond aesthetics, the Cerakote application is intended to improve resistance to wear and environmental exposure. All models are equipped with a checkered pistol-grip buttstock and fore-end made from American walnut, along with a ventilated rubber recoil pad.

Anthony Imperato, founder and CEO of Henry Repeating Arms, said the Burnt Bronze configuration originated as an internal experiment and quickly distinguished itself, leading to its adoption for the new series.

Configuration and Features

Explorer Carbines are built with 16.5-inch threaded barrels in a carbine-length configuration. Each rifle includes fully adjustable sights and receivers drilled and tapped for optics mounting. Sling swivel studs are installed at the factory to facilitate field carry.

The carbines are designed with an emphasis on portability and balance while maintaining the traditional lever-action format associated with Henry’s centerfire offerings.

Models and Chamberings

The series spans three model designations:

• H9 Explorer Carbine: Chambered in .30-30 Winchester and .360 Buckhammer, each with a 4-round capacity.
• H10 Explorer Carbine: Chambered in .45-70 Government with a 4-round capacity.
• H12 Explorer Carbine: Chambered in .357 Magnum/.38 Special and .44 Magnum/.44 Special, each with a 7-round capacity.

All models share the same general feature set, including the Burnt Bronze finish and walnut furniture.

Pricing and Warranty

The manufacturer’s suggested retail price for the Explorer Carbine line is $1,430. As with other Henry firearms, the rifles are manufactured in the United States and are backed by the company’s lifetime warranty.

Taurus Introduces TX9 as a Dedicated Duty-Grade Pistol Platform

Taurus has announced the TX9 series, a new line of striker-fired 9×19mm pistols positioned as the company’s first purpose-built, duty-grade handgun platform. Developed as an expansion of the existing TX platform, previously limited to rimfire, the TX9 is designed to meet military and law-enforcement standards, including NATO specifications. The pistols are built in the United States and are intended to serve duty, defensive, and concealed-carry roles through a unified system.

Modular Chassis and Core Design Features

Central to the TX9 series is the Taurus Modular System, which uses a serialized steel internal chassis. This design allows for modular grip configurations, simplified component replacement, and long-term adaptability across different frame sizes. Taurus positions the TX9 as a scalable system rather than a single fixed handgun. All models use a striker-fired trigger system intended to provide a consistent trigger pull across the lineup, supporting training continuity and predictable handling.

Optics-Ready Configuration Across the Line

Every TX9 pistol ships with a Taurus T.O.R.O. (Taurus Optic Ready Option) slide. The optic cut shares a standardized geometry designed to accommodate many of the most common duty and carry red-dot sights. Taurus states that the optic-ready capability was integrated into the slide design from inception, rather than added as a retrofit, with the goal of improving durability and maintaining zero under extended use.

Three Size Variants With Shared Architecture

The TX9 series launches with three configurations built around the same core architecture. The Full Size model features a 4.5-inch barrel and a 17-round magazine capacity, targeting uniformed duty use, home defense, and high-volume training. The Compact variant uses a 4.0-inch barrel with a 15-round magazine, offering a reduced footprint while retaining full-duty controls and handling characteristics. The Subcompact version is equipped with a 3.4-inch barrel and a 13-round magazine, intended for concealed or off-duty carry while preserving optics compatibility.

Consistent Ergonomics and Controls

All TX9 variants share the same control layout, trigger characteristics, and general ergonomics to allow seamless transition between sizes. Modular grip frames with interchangeable backstraps are included to accommodate different hand sizes. According to Taurus, this consistency is intended to reduce retraining requirements and improve user familiarity across multiple roles.

Strategic Significance for Taurus

Taurus leadership describes the TX9 as a major step in the company’s product strategy. CEO Bret Vorhees stated that the platform represents Taurus’s first dedicated duty pistol, applying the TX platform’s established ergonomics to a service-oriented 9mm system. With the TX9, Taurus aims to compete more directly in the duty and professional handgun market while maintaining cross-compatibility and modularity across the lineup.

Kimber Expands 2K11 Line With Compensated Models

Kimber Manufacturing has announced the addition of the 2K11 Comp series, expanding its high-capacity, 1911-style platform with factory-compensated variants. The new models are scheduled to debut in January 2026, roughly a year after the original 2K11 was introduced in late 2024. The expansion addresses sustained demand for recoil-mitigating options within Kimber’s double-stack 1911 lineup.

Four Configurations and Size Options

The 2K11 Comp series consists of four models offered in either black or stainless finishes. Buyers can choose between a full-size version with a 5-inch barrel or a Pro-size model with a 4.25-inch barrel. Each variant incorporates an integrated compensator positioned forward of the front sight. The compensator is designed to reduce muzzle rise and improve control during rapid or sustained fire without altering the platform’s core operating system.

Updated Construction and Grip Module

A notable update across the Comp series is the introduction of Kimber’s carbon fiber and glass-filled matrix grip module. The grip is paired with a CNC-machined stainless steel subframe coated in DLC, incorporating a proprietary shoulder intended to prevent magazine over-insertion and potential ejector damage. The design aims to balance weight reduction with structural rigidity while maintaining compatibility with the 2K11’s double-stack magazines.

Features and Mechanical Details

All 2K11 Comp pistols are chambered in 9mm and retain several features introduced with the original platform, including a patent-pending toolless guide rod system, external extractor, improved internal magazine geometry, and optics-ready slide. Select models are equipped with a Stan Chen Customs magwell and TAG Precision steel optic adapter plates. Barrels are crowned and fluted, using 5R rifling, and are fit to the slide to tight tolerances.

Manufacturing and Availability

Kimber states that each 2K11 Comp is assembled from start to finish by a single technician at its Troy, Alabama facility, where the stainless-steel slide, frame, and barrel are machined. Finishes vary by model, with some receiving DLC coatings and others offered in stainless. Retail availability is expected as early as January 2026, with immediate shipment planned following launch.

Ruger Updates AR-15 Catalog Ahead of SHOT Show 2026

As the firearms industry approaches SHOT Show 2026, Ruger has announced a restructuring of its AR-15 offerings. The new Harrier series will replace the long-running AR-556 family, signaling a shift in both branding and feature set. At launch, the Harrier line consists of two rifle configurations built around a shared core platform, with differences primarily in furniture and rail setup.

Initial Models and Pricing Structure

Both Harrier models feature 16-inch barrels and free-floated M-LOK handguards. The base configuration is equipped with standard A2-pattern furniture, including an A2 pistol grip and M4-style waffle stock, and carries a listed MSRP of $699. A second variant, priced at $749, upgrades to Magpul furniture, specifically the MOE-K2 grip and DT Carbine collapsible stock. This model also adds a full-length Picatinny rail along the 12 o’clock position of the handguard, providing additional mounting space for optics and accessories.

Manufacturing Location and Background

Product images for the Harrier series display a “Proudly Made in Hebron, KY” watermark. Hebron was previously home to Anderson Manufacturing, a well-known AR-15 producer that ceased operations before being acquired by Ruger. The Harrier rifles appear to reflect the integration of Anderson’s manufacturing assets into Ruger’s production pipeline. In its final years, Anderson expanded its AR lineup and improved overall fit and finish, suggesting that the Harrier series may benefit from that experience combined with Ruger’s quality control standards.

Barrel, Receiver, and Finish Specifications

Both rifles use a 16.1-inch government-profile barrel with a 1:8-inch twist rate and six-groove rifling. The barrel is nitrided for corrosion resistance and longevity and is threaded 1/2x28 at the muzzle, fitted with a removable A2 flash hider. Upper and lower receivers are machined from 7075-T6 aluminum forgings to mil-spec dimensions and finished with Type III hardcoat anodizing. The lower receiver incorporates a tension screw designed to reduce play between receivers.

Operating Components and Compatibility

The Harrier series is configured around standard AR-15 components for broad compatibility. Each rifle includes a single-stage GI trigger, mil-spec selector, charging handle, carbine buffer, and spring. The bolt carrier group is nitrided, with a properly staked gas key. The upper receiver includes a forward assist, dust cover, and brass deflector. Ruger ships the rifles with one 30-round Magpul PMAG, positioning the Harrier line as a turnkey replacement for the outgoing AR-556 models.

Glock Unveils Generation 6 Pistols With Focused Ergonomic Innovations

Glock has formally announced the Generation 6 (Gen6) series, bringing significant ergonomic and functional upgrades to its flagship G17, G19, and G45 pistols. This trio of 9mm handguns is slated for dealer release on January 20th, 2026, with pricing unchanged from current Gen5 MOS offerings—a testament to Glock’s commitment to measured evolution over drastic reinvention.

Incremental Improvements With User-Focused Design

Echoing Glock’s evolutionary approach, CEO Carlos Guevara described Gen6 as “thoughtful progress,” emphasizing continuity over trend-chasing. The Gen6 launch addresses two major sets of user complaints: grip ergonomics and optics mounting. Glock resists the industry’s shift toward modular fire control units, instead preserving its proven one-piece frame while enhancing handling characteristics.

The frame now includes a subtle palm swell, shaped using ergonomic mapping from Glock’s workforce. Two interchangeable backstraps (2mm and 4mm) are bundled, adjusting fit without separate beavertail inserts—the beavertail is now integrated into the frame. Texturing draws from RTF2 and RTF4 patterns, offering extended contact surfaces intended to improve purchase while remaining comfortable for all-day carry. The trigger guard has been recontoured for a higher grip, and a flared magazine well has been added, supporting swifter reloads.

Ambidextrous “gas pedal” shelves—small protrusions accessible to either hand—enhance recoil control, marking a notable functional addition to Glock’s minimalist aesthetic. Front slide serrations are now deeper and steeper to aid manipulation.

Trigger, Internal Mechanics, and Compatibility

In a major design update, all Gen6 pistols feature a flat-faced trigger, paired with a reduced trigger reach and undercut trigger guard. These elements are engineered to facilitate a higher grip and accommodate shooters with smaller hands, all while maintaining the Safe Action system.

Glock returns to a single captive recoil spring assembly. Gen6 barrels introduce new chamfering and internal geometry, making them incompatible with prior generations—restricting simple parts interchange. However, legacy Glock magazines remain compatible.

Optics Mounting: An All-Inclusive Approach

Departing from previous MOS (Modular Optic System) segmentation, every Gen6 pistol ships with optics-ready capability as standard. Each gun includes three polymer mounting plates for RMR and DPP footprints. These act like crush washers, absorbing recoil and allowing economical replacement, but it remains to be seen whether the polymer plates will maintain optical zero under prolonged use. Notably absent is the A-Cut mounting system developed with Aimpoint; further details may be forthcoming at major industry shows.

Model Specifications

G17 Gen6:
- Full-size, 17+1 capacity
- 7.95-inch overall length, 4.49-inch barrel
- 680g loaded (approx. 23.99 oz)

G19 Gen6:
- Compact, 15+1 capacity
- 7.28-inch overall length, 4.02-inch barrel
- 640g loaded (approx. 22.58 oz)

G45 Gen6:
- Crossover, G19 slide with G17 frame, 17+1 capacity
- 7.44-inch overall length, 4.02-inch barrel
- 655g loaded (approx. 23.10 oz)

All models incorporate hexagonal rifling, ambidextrous slide stop, reversible magazine catch, and a trigger pull of approximately 5.8 lbs.

Unanswered Questions and Early Analysis

The Gen6 rollout is limited to three 9mm models; further expansion to other calibers and sizes remains unannounced. Long-term durability of the new grip texture and polymer optic plates is unproven, pending field testing. The anti-auto switch features from Glock’s V series are now standard, but the fate of the A-Cut optics interface is unresolved.

Conclusion: Measured Innovation from an Industry Standard

Gen6 reflects Glock’s methodical philosophy—pragmatic refinement tailored to shooter feedback, not wholesale reinvention. Meaningful ergonomic upgrades, universal optics readiness, and internal tweaks further cement Glock’s enduring market dominance. Availability is set for January 20th, 2026, with no MSRP increase.

Marlin Introduces First-Ever 10mm Auto Lever-Action Trapper

In a significant move for lever-action enthusiasts, Marlin has announced the release of the Model 1894 Trapper chambered in 10mm Auto, breaking new ground for the legendary firearms brand. This marks the first instance where Marlin has paired the venerable lever-action platform with the powerful, rimless 10mm cartridge, setting the stage for fresh discussions on versatility and modern utility in the world of lever guns.

Modern Engineering Meets Classic Design

Staying true to its rugged Trapper lineage, the new 10mm variant boasts an all-stainless steel construction coupled with a durable laminate handguard and stock. Unlike previous Trapper models, Marlin equips the new release with a receiver-mounted Skinner peep sight, enhancing rapid target acquisition while omitting the conventional barrel-mounted open sight. Additionally, the 16-inch barrel is threaded in a 5/8x24 pattern—ideal for users wishing to attach muzzle brakes or suppressors, and comes from the factory with a protective thread cap.

Users will appreciate the matte finish on all stainless components, which reduces glare in the field while maintaining the robust corrosion resistance expected from the series. Unique to the 10mm Trapper is an oversized lever loop, providing comfort and space for gloved hands—especially important for cold-weather applications and gloved shooting scenarios.

High Capacity, Smooth Operation

A standout feature is the Trapper 10mm’s tubular magazine, which holds 10 full-power cartridges—surpassing the capacity of its .357 and .44 Magnum siblings by two rounds, and at least doubling the magazine size of the .30-30 and .45-70 models. The rifle’s newly designed action is specifically engineered to reliably cycle a wide range of 10mm factory ammunition. However, it’s worth noting that this model is not compatible with .40 S&W cartridges, an important distinction for shooters.

Loading is managed via a sturdy, receiver-based gate system, while a cross-bolt manual safety and traditional half-cock hammer provide extra security. The soft rubber buttpad ensures even the snappy recoil of 10mm remains manageable, and sharp checkering along the furniture promises a secure grip in all conditions.

Performance and Practicality for Modern Shooters

Attention to detail permeates the new release. The cold hammer-forged barrel delivers outstanding rifling precision for accuracy and longevity. The slim forend and overall balanced weight keep the rifle agile and quick to mount, reflecting its “Trapper” heritage as a handy, packable companion. Sling swivel studs and an offset hammer spur round out a features list that puts a premium on usefulness for hunters, sport shooters, and firearms collectors alike.

With an MSRP of $1,599, Marlin positions the 10mm Trapper as a premium addition to its catalog—one designed for those who appreciate both classic firearms and modern performance. The 10mm Auto’s resurgence in popularity for hunting and self-defense makes this lever action a particularly timely and intriguing platform crossover.

A New Chapter for Lever-Action Innovation

Marlin’s latest release exemplifies the blending of time-honored firearm tradition with innovative chamberings and contemporary features. For those seeking a lever-action rifle that stands apart from the crowd, the 1894 Trapper in 10mm Auto offers both classic style and cutting-edge capability—and it’s available to consumers starting today.

Viking Desert Eagle: Norse Inspiration Meets Modern Firepower

Magnum Research has announced the release of its Limited Edition Viking Desert Eagle, blending Old World legend with contemporary handgun engineering. This striking model, chambered in .50 Action Express, arrives as both a collector’s artifact and a high-performance shooting tool.

Craftsmanship Rooted in Mythology

The Viking Desert Eagle features a distressed, battle-worn finish designed to evoke imagery of Norse warriors and epic sagas. Engraved knotwork covers the slide and barrel, echoing ancient artistry, while custom grips display a Viking longship—an emblem of exploration and conquest. This thematic approach sets the pistol apart, making it a statement piece for enthusiasts seeking more than a standard sidearm.

Modern Control and Performance

Underneath its ornamental exterior, the Viking Desert Eagle retains the powerful attributes that have made the platform iconic. Its robust all-steel construction offers weight and durability, assisting in recoil management from the potent .50 AE cartridge. The gas-operated action, a hallmark of the Desert Eagle design, further tames recoil, while an integrated muzzle brake adds control for more manageable shooting. An included Picatinny rail supports optics, broadening the pistol’s versatility for the modern range.

A Collector’s Opportunity

Limited in availability, the Viking Desert Eagle ships with a single seven-round magazine and maintains the legendary reliability and power associated with the Desert Eagle line. The firearm targets those who value both artistry and function—inviting owners to own a symbol of Norse legend married to the legacy of Magnum Research’s engineering.

Magnum Research: A Legacy of Innovation

Founded in 1979, Magnum Research established itself as a leader in powerful hunting handguns, most notably with the Desert Eagle. The company has continued to innovate with models like the BFR revolver, Baby Eagle, MR1911 pistols, and a variety of rifles. Acquired by the Kahr Firearms Group in 2010, Magnum Research remains a prominent name, recognized both for technical achievement and a cinematic presence. The Viking Desert Eagle marks a new chapter, fusing history and mythology with unmatched modern performance.

FightLite Industries Unveils DFX Belt-Fed Upper Receiver for AR Platforms

FightLite Industries has announced the upcoming release of its DFX Dual-Feed Upper Receiver, a belt-fed modular system designed to seamlessly upgrade standard AR-15, M16, M4, or HK416 pattern lower receivers. The new DFX aims to combine sustained-fire capability with the flexibility of traditional magazine-fed operation, targeting civilian enthusiasts and professional users seeking enhanced performance.

Dual-Feed Versatility and Drop-In Installation

The DFX upper receiver distinguishes itself with its patented Dual-Feed design, allowing operators to utilize both USGI M27 linked ammunition and standard AR magazines. This adaptability provides users with expanded options in various scenarios without requiring modifications to the host lower receiver.

Installation is intended to be straightforward, taking only minutes and requiring no permanent changes to the lower. The kit comes complete with a detailed operator’s manual, robust recoil spring, a dedicated bolt catch, and 100 M27 links, equipping users for immediate use out of the box.

Features Engineered for Performance

At the core of the DFX is a free-floating, heavy-profile barrel designed for sustained fire and improved heat management. The piston-driven operating system, a patent-pending short-stroke gas-piston unit, enables cleaner operation and reduced maintenance, even under strenuous conditions. The system is also equipped with a MIL-STD 1913 quad-rail handguard and offers optional M-LOK configurations, supporting a wide array of modern optics and accessories.

Additional highlights include: - Compatibility with MIL-Spec AR-15/M16/M4 and HK416 lower receivers - 5.56x45mm NATO / .223 REM chambering - 16.25-inch barrel with 1:7” twist and ½”-28 threading - Precision-machined 7075-T6 billet upper, feed cover, and components - Manganese phosphate and hardcoat anodized finish for durability - Enhanced, full-auto bolt carrier group for reliability in high-volume use

Market Position and Anticipated Launch

Priced at $3,995, the DFX upper is slated for release in Fall 2025. FightLite emphasizes robust support with in-stock spare parts, accessories, and a dedicated customer service team. The company states the DFX has been conceptualized for responsible gun owners, law enforcement, and security professionals who require a reliable and flexible high-volume firing solution.

Pre-orders are now open, with orders to be fulfilled sequentially as availability comes online. As interest grows around modular belt-fed systems, the DFX positions itself as a significant entry into the evolving AR accessory market, enabling users to experience sustained-fire capability without departing from familiar semi-automatic platforms.

U.S.-Made Innovation for Modern Demands

Designed, engineered, and manufactured in the United States, the FightLite DFX leverages domestic expertise in accurate, durable weapon systems. The development team—comprising professional shooters, machinists, and designers—has focused on providing superior sustained-fire performance while accommodating the practical needs of today’s armed citizens and professionals.

Springfield Armory Introduces 1911 Operator AOS Threaded Pistols

Springfield Armory has expanded its well-regarded line of 1911 handguns with the launch of the Operator AOS Threaded series, designed specifically to meet the rising demand for suppressor-ready pistols. This new offering reflects a growing trend among firearm enthusiasts, who increasingly seek compatibility with muzzle devices such as suppressors and compensators.

Enhanced Features for Modern Shooters

The 1911 Operator AOS Threaded model arrives chambered in .45 ACP, a classic caliber with enduring popularity. It features a 5.75-inch forged stainless steel threaded barrel (.578 x 28), making it adaptable for various muzzle attachments. The slide and frame are both forged from carbon steel and treated with Cerakote finishes, providing increased durability against abrasions and adverse weather conditions.

In addition to robust construction, the new model comes optics-ready and is equipped with tritium front sights paired with a black serrated rear, allowing for improved sight acquisition in a range of lighting conditions. The pistol maintains the traditional GI-style recoil system and includes VZ Grips G10, enhancing shooter control and overall handling.

Color Options and Specifications

Springfield Armory offers the 1911 Operator AOS Threaded in four colorways: Black, Coyote Brown, OD Green, and Tungsten Gray. Regardless of finish, each pistol shares the same manufacturer's suggested retail price (MSRP) of $1,289. Other specifications include two 8-round magazines, an overall weight of 42 ounces, a length of 8.6 inches, and a height of 5.25 inches. This standardization provides buyers with multiple aesthetic choices without compromising core performance or pricing.

Manufacturer’s Perspective

Steve Kramer, Vice President of Marketing for Springfield Armory, emphasized the Operator AOS Threaded’s position within the company’s broader portfolio. "The 1911 Operator AOS Threaded .45 adds a new dimension of performance to the proven Operator line of pistols," Kramer stated. He highlighted the customizable finishes and the suppressor-ready configuration as key enhancements aimed at discerning 1911 enthusiasts.

Adapting to Changing Preferences

The introduction of the Operator AOS Threaded series marks Springfield Armory’s continued adaptation to evolving shooter preferences. As suppressor use becomes more widespread among civilian and professional users, firearms manufacturers are responding by integrating compatibility as a standard feature.

With its classic design, modernized features, and versatility in both appearance and function, the 1911 Operator AOS Threaded is positioned to appeal to long-time fans of the platform as well as new users seeking a reliable and customizable .45 ACP handgun.

Springfield Armory Reveals New Coyote Brown 1911 DS Prodigy Comp 9mm

Springfield recently introduced another exciting range of weapons to their ever-growing holster after their successful attendance at the SHOT Show. The newest addition to Springfield Armory's collection is the 1911 DS Prodigy Comp AOS 9mm handgun, now available in the striking Coyote Brown colorway—an exciting notice for fans of 50 Shades of FDE.

Choosing the Perfect Model

Springfield Armory’s Coyote Brown 1911 DS Prodigy Comp 9mm offers four distinct variations for potential consumers. You can choose between two sizes - 5” and 4.25” models, and two magazine options, Hi-Cap and Lo-Cap, based on local ordinances and personal preferences.

Featuring an AOS mounting system allowing compatibility with favorite optics, these variants continue the tradition of the well-loved 1911 ergonomic design. Now available with a unique Coyote Brown twist.

Springfield Armory Speaks on the New Addition

The Vice President of Marketing for Springfield Armory, Steve Kramer, expressed pride in the new addition. “The 1911 DS Prodigy gives shooters a pistol with the classic appeal of the 1911, but enhanced with a double-stack magazine capacity and modern features.”, says Keramer. The new flat-shooting Coyote Brown Prodigy Comp pistols aim to offer reduced muzzle flip and faster follow-up shots while adding a highly popular color option.

Final Considerations

The vast offerings from Springfield Armory, ranging from colorways to magazine capacities to barrel sizes - everything caters to the diverse tastes of gun enthusiasts, demonstrating the freedom to personalize. The new 2011-style handguns, including the Coyote Brown 1911 DS Prodigy Comp 9mm pistols, are priced around a reasonable $1,600.

Each pistol includes one 17-round and one 20-round magazine, with the possibility to purchase an optional 26-rounder. Both the 5” and the 4.25” models retail for an MSRP of $1,649. Ten-round versions of both models are also accessible in certain locations at the same MSRP.

Coyote Brown 1911 DS Prodigy Comp AOS 9mm | PH9119AOSCB-COMP | 706397987435 | MSRP: $1,649 Coyote Brown 1911 DS Prodigy Comp AOS Lo-Cap 9mm| PH9119AOSCBLC-COMP | 706397988012 | MSRP: $1,649 Coyote Brown 1911 DS Prodigy Comp 4.25” AOS 9mm | PH9117AOSCB-COMP | 706397987428 | MSRP: $1,649 Coyote Brown 1911 DS Prodigy Comp 4.25” AOS Lo-Cap 9mm | PH9117AOSCBLC-COMP | 706397988029 | MSRP: $1,649

Smith & Wesson Unveils Latest CSX E-Series Micro-Compact Pistols

In a recent move showcasing their commitment to innovation and craftsmanship, Smith & Wesson has presented the latest addition to their concealed carry platform - the CSX E-Series. Building upon the success of the CSX line, which debuted only three years prior with the introduction of the aluminum alloy frame CSX micro-compact pistols, the premier gunsmiths have been diligently honing the line's design and features, and the results are anything but ordinary. Now, we turn our attention to what makes the CSX E-Series stand out.

On Improved Specifications and New Design Upgrades

The CSX E-Series, while holding on to its predecessor’s aluminum alloy frame, is packed with design enhancements that are far from trivial. Ranging in barrel lengths of 3.1” or 3.6”, these new-generation 9mm micro-compact weapons come bundled with three magazine capacity options of 12, 15, and 17 rounds, as well as 10-round compliant versions, thus catering to varied user requirements.

Enhanced Optics and Ingenious Adaptability

Shaping up as optics-ready firearms, the CSX E-Series pistols are fitted with an RMS-C footprint, fully compatible with the Holosun 507K, ensuring an unrivaled shooting experience. The ClearSight cut, a Smith & Wesson exclusive feature, effectively diverts gases from the optic lens, securing an unmasked view for the shooter.

Additionally, the CSX E-Series emphasizes versatility, featuring a newly conceived modular grip adapter. This empowers users to adjust frame dimensions to their preference, be it for deep concealment or more robust handling and greater capacity. Other enhancements include an enlarged front strap for an improved grip, a redesigned trigger for better shooting accuracy, interchangeable backstraps, ambidextrous controls, standard white-dot sights, and a timeless flat-black finished frame.

Pricing and Availability of CSX E-Series Variants

With all four variants of the Smith & Wesson CSX E-Series now available in markets, they carry a listed MSRP of $699.00. Given their advanced design, adaptability, and feature-packed characteristics, these pistols unquestionably better the concealed carry platform.

Smith & Wesson is asserting with the launch of the new CSX E-Series model that it embodies an enhanced evolution of a classic platform, evolving to meet the high demands of those requiring more from their concealed carry, making it more than just a firearm – it's a reliable companion.

The Staccato HD: Innovation in 2011 Pistols

Staccato has recently unveiled its highly anticipated product: the innovative and technologically advanced Staccato HD. This next-level edition of the 2011 platform has been developed based on valuable insights from elite law enforcement and government customers and tested extensively to endure the toughest environments and conditions.

Featuring a Suite of Performance Upgrades

The Staccato HD, built on a chassis of substantial performance enhancements both inside and out, offers an even more refined handling experience. One of the standout features of this new pistol range is its compatibility with the readily available Glock-pattern magazines. This characteristic ensures an efficient, affordable, and easily available ammunition source, making the Staccato HD series a seamless addition to law enforcement and government equipment rosters.

Modifications to the grip have resulted in a slimmer, more ergonomic experience, including a higher beavertail and a larger trigger guard. Notably, all fire controls on this line will be fully ambidextrous, offering a perfectly mirrored manual-of-arms for either hand. The HD line also showcases a revamped HOST system for direct-mounting red dot optics, allowing for easy dot acquisition and smaller backup iron sights.

Introducing the Staccato HD P4 and P4.5

At the heart of the HD line is the Staccato HD P4. This model is based heavily on feedback from elite government customers and is built to meet the preferences of both professionals and armed citizens. The dimensions, weight, and general specifications of the Staccato HD P4 ensure it is a top-tier product in its category.

Looking forward to the spring of 2025, Staccato will be launching the HD P4.5. This model extends the success of the P4 by featuring a unique 4.5-inch sight block barrel. Benefits included reduced muzzle flip and a shortened 4-inch slide for faster cycle time.

Customizable Upgrade Packages Available

For those looking to add a personal touch or seeking advanced refinement, Staccato offers two upgrade packages for their HD pistols: the HD Preferred and the HD Premium. Upgrades within these packages range from a DLC barrel to an upgraded Trijicon front sight and additional magazines.

The Staccato HD line will be available on January 28th for purchase through their website and at select Staccato dealers. With its combination of proven performance enhancements, its roots in extensive feedback from elite forces, and room for further customization, the Staccato HD series is a promising new entry in the world of 2011 pistols.

Introducing the 1911 DS Prodigy Compact from Springfield Armory

In a landmark announcement, Springfield Armory has launched a brand-new compact firearm - the 1911 DS Prodigy Compact in 9mm. Crafted with care, the Prodigy Compact heightens the 1911 platform's legacy by presenting two sizes - 3.5” and 4.25” - along with increasing the capacity to a double-stack and integrating carry-driven features.

Distinctive Design for Optimal Performance

The Prodigy Compact is meticulously configured around a flush-fitting, double-stack magazine. Despite the firearm's slim design for user-friendly gripping, it can efficiently house 15 rounds of 9mm ammunition. Two magazines come as a standard provision with both variants of the gun.

For those who value concealed carry and self-defense, the innovative features of this firearm serve the purpose. A tritium front sight post is incorporated for improved visibility under low-light conditions. This alignment complements a serrated black U-notch rear sight unit. Importantly, the firearms are furnished with AOS (Agency Optic System) plates exclusively designed for the 1911 DS.

Advanced Features for Seamless Use

The AOS plate, machined from billet steel, is tailored to provide the appropriate optic height to ensure an intuitive sight picture and instant target acquisition. It is also equipped with an integral rear sight. A HEX Dragonfly compatible plate and a standard cover plate are shipped together with the Prodigy, and additional optic-specific plates can be procured through the Springfield Armory Store.

In terms of weight, the Prodigy Compacts score high on the usability scale, with the 3.5” model weighing 25.5 oz. and its 4.25” counterpart 29 oz. This has been made possible with the integration of polymer grip modules into the billet machined 7075-T6 aluminum frame. These compact and lightweight carry concealed weapons (CCW) also feature slides made from forged carbon steel and match-grade bull barrels of forged stainless steel.

Comfort and Durability for Everyday Carrying

The Prodigy Compacts have been designed with an ambidextrous safety mechanism, recontoured hammers, and beavertail grips that cut down on bulk while keeping full functionality intact. To enhance corrosion resistance, the firearms boast a black Cerakote finish on metal parts, complementing the black polymer grip module. The barrels have been given a black DLC finish.

Springfield Armory's Vice President of Marketing, Steve Kramer, expressed his excitement about the release of these compact variants of the popular 1911 DS Prodigy. Kramer stated that the new Prodigy Compact's mix of a double-stack capacity, ease of carrying, and the 1911’s dynamic shooting traits make it an enticing option for EDC enthusiasts.

A Masterful Blend of Tradition and Innovation

Priced at $1,549 for all variants, the 1911 DS Prodigy Compacts incorporate beloved characteristics of the 1911 legacy and marry them with a modern capacity to offer unmatched functionality suitable for day-to-day carrying.

For the 1911 DS Prodigy 3.5” Compact AOS (PH9115AOS, 706397969080), and the 1911 DS Prodigy 4.25” Compact AOS (PH9116AOS, 706397969073), each model carries the same price tag of $1,549 MSRP, reinforcing Springfield Armory's commitment to providing quality and value in their offerings.

Mossberg Unveils Next-Level Pump-Action Shotguns: The 590R and 590RM with Rotary Safety Selector

Mossberg, a pioneer in pump-action shotgun manufacturing, has introduced a new breed of its acclaimed 590 series - the 590R and 590RM (Mag Fed) models. Renowned for its reliability, superior performance, and range of configurations, the Mossberg 590 series has set the standard for duty and home defense shotguns for years. The evolution of this supreme tactical platform now presents gun enthusiasts with groundbreaking features like a user-friendly redesigned forend, an integrated barrel/single heat shield, and most notably, an ambidextrous rotary safety selector. Available in four unique models, including two standard models and two mag-fed versions, the 590R keeps its predecessor's key features while being the first in the market to feature double-stack magazines for pump-action shotguns.

Core Features of the 590R and Improved Design for Ease of Maintenance

Boasting the universally revered features of the 590 platform, including non-binding twin action bars, positive steel-to-steel lock-up, and an anti-jam elevator, this next-generation version offers enhanced features for unprecedented user comfort and accessibility. A versatile clean-out magazine tube with a cap, designed for easy maintenance, added to the dual extractors, aluminum receiver, and drilled and tapped receivers, further elevates the 590R’s status as the ultimate shotgun choice.

Mossberg 590RM: The Evolution of the Mag Fed 590M and Key Features

Closely following the blueprint of the 2018-introduced 590M Mag Fed, the new 590RM shotgun stands out with its detachable magazine and integral stabilizing ribs. Designed to provide secure lock-up, the ribs directly engage with notches on the receiver, resulting in a sturdy connection. The 590RM, provided with a magazine release button and mounting guide located ahead of the trigger guard, is fully ambidextrous. The shotgun’s detachable magazines are available in 5, 10, 15, and 20-round capacities, offering options for varying individual needs.

590R and 590RM Pump-Action Shotguns: Overview of Key Features

The laundry list of features for the 590R and 590RM models includes an ambidextrous, rotary safety selector and a Mossberg-designed stock adjustable to five positions (12 – 15.25 inches). Stock/Base compatibility with other grip designs, a compact ergonomic forend, a 5-inch barrel with a removable heat shield, an enlarged beveled loading port, and an elongated bolt release all contribute to a smooth and personalized shooting experience.

Furthermore, the newly introduced models come furnished with a Magpul MOE+ pistol grip, a front M-LOK adapter with dual-sided accessory mounting slots, a flat profile trigger with a smooth, crisp break, and an extended follower for ease of loading (590R only). The icing on the cake is the electroplated internal and external receiver, offering unmatched durability with a smoother finish.

The Superior Shotgun Series: Model Details and Pricing

The 590R (50762 and 50761) each carry a Manufacturer's Suggested Retail Price of $1,085. The 12-gauge, 3-inch standard versions come standard with an 18.5-inch barrel, a compact forend, an adjustable 5-position stock, a MOE pistol grip, and a Picatinny rail.

The 590RM (50213 and 50218) versions, each priced at $1,190, offer a 2.75-inch 12-gauge, magazine-fed pump action. Each model is equipped with an 18.5-inch barrel with an integrated heat shield, a compact forend, a 5-position adjustable stock, and a 10-round magazine.

This evolved shotgun series from Mossberg, with cutting-edge features and a design philosophy focusing on ease of use and reliability, is poised to redefine the tactical platform and set the new standard for pump-action shotguns.

Ruger Debuts Ultra-light 10/22 Rifle with Carbon Fiber Barrel Sleeve

Sturm, Ruger & Company, Inc. is excited to reveal the newest addition to their renowned armory — a supremely lightweight 10/22 rifle. Assembled at Ruger's Newport, New Hampshire facility, the .22 LR rifle is surrounded by a flurry of standout features, creating a custom-aesthetic and user experience.

Sitting Atop the Lightweight Ladder

This revolutionary new piece underscores Ruger's commitment to innovative design, as they proudly present the lightest 10/22 rifle in the company's current repertoire. Tipping the scales at only 3.5 lbs, this agile rifle showcases a 16.1" cold hammer-forged barrel enveloped by a carbon fiber sleeve. This clever construction not only reduces weight but enhances rigidity due to the stainless-steel tensioned barrel. Ideal for users seeking reduced vibration alongside the option to add muzzle devices, the barrel is threaded 1/2"-28.

Hardy Stock with Enhanced Grip and Design

The Magpul MOE X-22 stock, renowned for its lightweight yet robust characteristics, encases the new rifle. The black aesthetic is elevated with a textured, weather-resistant splatter paint finish that assures improved grip even in challenging climatic conditions. Built for the modern user, the stock is equipped with M-LOK attachment slots positioned at 6 o’clock and integral locking sling swivel loops. The length of pull measures at 13.5".

Trigger Configurations for Improved Firing

Ruger has also added a distinctive touch to the new 10/22 model with their authentic Ruger BX-Trigger®. This encapsulates a pristine break, coupled with an approximate pull weight of 2.75 lbs.

Ruger Custom Shop: Launching Chassis Models

In addition to the lightweight 10/22 release, Ruger's Custom Shop is also introducing two unique 10/22 rifles enveloped in a Grey Birch chassis. Sporting a tensioned barrel with a carbon fiber sleeve, the BX-Trigger, and options for right-handed and left-handed shooters, these models exemplify versatility. The high-end Grey Birch chassis has adjustable configurations for length of pull and comb height. It folds effortlessly, ensuring easy transportation. The 10" forend accommodates M-LOK slots and an Arca-Swiss rail underneath.

Derya Arms Sets Foot in U.S. with New Manufacturing Unit, Unveils Fresh E-Commerce Platform

Derya Arms, a trusted name for 9mm pistols and 12-gauge shotguns, has extended its footprint to the United States, setting off a ripple of excitement among American firearm enthusiasts. This marked expansion involves the establishment of a primary 15,000-square-foot base in Jacksonville, Florida. The facility will serve as both the headquarters and the factory where the company will import firearms, with domestic shooting absolutely on the cards scheduled from 2025 onwards.

Breathing Life Into American Manufacturing with Top-tier Firearms

Abdullah Celer, president of South Derya Corporation dba Derya, conveyed the company's enthusiasm for this venture. "With an unflinching commitment to quality, we are thrilled to introduce the Derya brand to the United States. Our initial launch will feature two of our hallmark creations, the DY9 pistol and the DY12 shotgun," expressed Celer. He further highlighted the admirable dedication and proficiency of American labor, voicing his anticipation about expanding the product range in the future.

The DY9 and DY12 introductions promise shooters a superior shooting experience with high-quality, versatile, and high-capacity 9mm-chambered guns and adaptable shotguns that offer tactical leverage. Both products have earned a commendation for their striking reliability, performance, and groundbreaking design.

New Digital Interface to Bolster U.S. Presence

Alongside this expansion, Derya Arms has also brought forth a revamped U.S. website. This digital avenue will connect enthusiasts and dealers directly to the brand, featuring comprehensive product information, exclusive U.S.-based promotions, news, upcoming launches, and a committed customer service division catering to product inquiries.

A Legacy Carved from Years of Excellence

Starting its journey in the Beysehir region of Turkey back in 1998, Derya Arms has risen to become a global brand, boasting a massive 250,000-square-foot factory and exporting its top-tier shotguns, pistols, and rifles to 65 countries worldwide. To continue meeting the escalating demand, the firm is on the brink of unveiling a second manufacturing facility of equivalent size in the Konya locale of Turkey. Derya Arms stands tall as the largest shotgun manufacturer and the second-largest small-arms producer in Turkey, as per website details.

Fans can brace themselves for an early 2025 launch of Derya Arms guns, with the high-capacity DY9 primed to be the first off the shelves.